千赢qy88 vip-千赢网页手机版-登录

position: Home >> News >> Industry news

'.png

Telephone:+86-757-81260486

Fax:+86-757-26154135

Website:www.hongrx.com

address:

Shibei Town, Shihai Town, Nanhai District, Foshan

Industrial Park Xingye roadside workshop three


Notes for toilet paper cutter

pubdate:2018-04-27 author: clicks:

       After the toilet paper base paper is rewound by rewinder, it is cut into short rolls by paper cutter, and then packed into finished paper for market sale. How to use a good paper cutter to cut short, neat and smooth is also a matter of product quality.

     

1, the paper cutter motor must connect zero line or ground wire to prevent leakage and ensure operation safety.

2. The toilet paper cutter should be laid flat vertically and steadily. In order to avoid vibration, some paper and leather pads can be placed evenly below.

3. The upper and lower wheels of the paper cutter should rotate in parallel, the less noise, the better. If the noise is greater or larger, it is necessary to check whether the bearing is lack of oil or damaged.

4. To use high-quality paper cutter, that is, not easy to damage, long service life, smooth and glossy cutting surface, safe operation.

5. Check whether the short roll is neat, you can put several short rolls vertically on the workbench and rotate slowly, you can also put the scrap flat on the workbench and invert a section of check to see if the two sides of the roll are parallel.

6. When cutting paper, the cutting knife must be vertical. If the cutting knife deflects from left to right, the lower grinding wheel can be adjusted. The width of both sides of the cutting knife should be the same.


This article URL:/en/news/381.html

千赢qy88 vip|千赢网页手机版

XML 地图 | Sitemap 地图